New manufacture hall of Turbine works Ltd, located in the bussines area Karlovac is completed and released into use c, Logorište – Belajske Poljice, a few kilometers from the center of Karlovac.
Hall with its 1200m2 of usable floor area and 10m in height to the crane hook is designed and intended for installation and machining work on steam turbines up to 25 MW of power and other plant equipment, as well as turbo compressors, water turbines, semi-axial and axial pumps, gearboxes and similar plant equipment.
Hall workspace is served by two cranes of which the main crain has capacity of 25 tons and auxilliary has capacity of 6 tons. There is also a assembly area of approximately 400m2 and a special area for pressure testing of 100m2.
The hall is equipped with dynamic balancing machine, universal horizontal milling machine and a large lathe – machine specifications are listed below.
In addition to these machines, there is also reserved space for vertical lathe with working diameter up to 3.5 m, and smaller auxilliary machines (lathes, milling machines, etc.). The facility also contains spaces for staff, tools, compressed air station and other auxiliary facilities.
This hall is a significant investment, and the first phase in the expansion of Turbine Works Ltd. production capacity, which hereby confirms strategic commitment to the development, manufacture and maintenance of power equipment, and above all, steam turbines and pumps, as well as greatly increasing the existing opportunities and opens new directions for development of the company.
Dynamic balancing machine –„SCHENCK“, type H6V
|
(latest generation of electronics) |
|
L= 8500 mm |
|
M = 150 – 18000 kg |
|
D=2400 mm |
|
50 – 400 mm |
|
4,18 gmm |
Universal horisontal drill – mill, „Lola Ribar“ type BG 180P
|
180 mm |
|
7.000 mm |
|
3.000 mm |
|
6.500 x 4.500 mm |
|
2.200 x 2.200 mm |
|
1.300 mm |
|
16 tona |
|
25 tona |
CNC Lathe, „POREBA“ type TC2B-300CNC x 8m -3/2
|
3.000 mm |
|
8.000 mm |
|
25 tona |
